AUTOMOBILE GALLERY

Bali deserves two thumbs signals in terms of modifications. Their work, especially for motorcycles, has a value of very high art. Maybe you still remember the Honda Vario diamond studded or low-rider Honda Beat Kompas.com displayed.

This time, there's nothing more powerful, the work I Dewa Gede Agus Umbara. Incidentally, Agus was an artist. No doubt, Honda Supra 1999 production was constrained ogoh-ogoh alien style. Agus so called results of this hand skills.

Of view, the process needed a calm, precision, and patience and a bit complex because so many details. "We did keep his alien form perfect, such as the bone loss, legs, and head," he explained.

Deserves praise back to Agus because he uses the waste, not the new components. Lyrics of the tail and head. He said that the use of waste from the fence combined with a motor component unused. He took the example of shockbreker front, gear, until the chain.

Fuel tank is made of a tube in the middle of the rod. Admittedly, filling stations must use the small tube. Then, several former shockbreker made hand and foot.

Although the form of many doubtful if these aliens can walk, Agus ensure made able to slide. Only, he says that for the new will take, he had to adapt because the bike was heavy. Then, buttocks feel uncomfortable because sitting on hard metal.

Have you ever seen a contrived skutik so big scooter (skusar) as Scooter Majesty? Well, Andit Kandiawan from Surabaya, East Java, successfully realize the basic ingredients of artificial Honda Vario 2008. Admittedly, Majesty was the inspiration to the formation of this skusar figure.

Here, the most notable changes made to the body Andit. To be added bongsor, the framework of constrained delay in accordance with gede body that will be built. Central framework under floordeck a single 2.5-inch pipe size is not enough convicted.

"I'm looking for larger diameter pipe again, more or less 20 cm and then welded patent diselubungkan and use electric welding," he explained. To be even stronger, there is an additional booster of 2 cm-thick plates. Set up the welding plate to oppose the moment of the play so that the frame remains strong.

For body affairs, practically Andit "brake" when done. The reason, he was used to make car body modification. "Assembled themselves as the concept that mimics the Yamaha Majesty, including the design of a labored seat rather low imitate Japanese scooter big," said enthusiasts Honda CB200 and Kawasaki Binter this Merzy.

Design headlights made cool by using light framed CBR 900. Here, the element of luxury immediately apparent, especially with audio installed to add support for high-end features.

Because the car modif experience, this hero city builder to apply designs ever used in the car. One of them, oil catch tank. You know, the canister containing a filter to separate the heat and the usual oil applied to the flow modif Japan Domestic Market (JDM).

Want to view Yamaha V-ixion like this? Nah need to be recast body. However, do not necessarily view this bike blamed "negative" because of not using a mirror. Remarkably, even without a mirror, behind the state could be monitored without having to turn heads.

That can be done because the motor sport tuning fork bearing is equipped with CCTV cameras. "Our camera planted in the back near the license plate," said Julius Triwibowo, the modifikator. Then, pull the cable from the back forward, and the monitor mounted on the gas tank.

Very small size of the monitor. Said Julius Bowo-so usually called-size only 10 x 8 cm. Although small, the owner BW modification is sure if the tool is very helpful driver. Only, the body must be bent to watch the monitor screen.

In addition to the camera installation, Bowo also makes motorcycles look so handsome. The parts are solid contrived empty. For example, given a cover body, including under the gas tank and the engine (engine guard).

At the front, upside down sokbreker using a variation made in Taiwan. Headlights replaced with Suzuki Satria FU belongs-150, and the result is perfect. Speedometer is also taken from the 4-stroke motors that.

Still on the front, so macho after tongkrongan fitted with a double disc. After looking more solid, so look more manly after both wheels fitted with wide tires.

Junaidi Saputra from Medan, North Sumatra, try to develop more low flow rider modifications. Indeed, judging from the look of his Yamaha Mio Sporty, a strong impression that only lengthen modifikator axle which is characteristic of low-rider. But, if the scrutiny right, there is an experiment that looked at it skutik garputala logo.

"As shown on the front and rear wheels, a long follow-up," said Junaidi, builder Admair Thula (AT) which is based in Medan. Total length of the motor to be 3.5 meters. That is, dimensions Mio delay of about 1 meter.

Long retreat, retreat, said Junaidi, to 32 cm. This does not include the end of the outer tire. However, there are unique on the retreat, withdraw it. When the construction is typically shaped letters "H", here he made a model "J".

"To be strong due to rim and engine load, the material is taken from galvanized," he explained. This effort shall thumbs up. Imagine, with the rear wheel of a super-wide, the device remains in the middle. If viewed from the tire and rim application, then surely this Mio into Bobber style.

To adjust the back of the already overly stretch, re-house CVT reformed. Way, that part was cut and added to plates 8 cm to match the back, though not quite fit the position because it was too out of place.

Front wheel chopper-like models in the Harley-proved difficult to maneuver. Turning radius is very small like a chopper-style motorcycle HD. Changes made by sliding out and replace komstir triangular shaped enggak again straight, but it resembles a "V".

When asked to roads with berziga-zagging in between rows of cones, the motor was trouble. In fact, the driver must be off the foot many times. However, testing his courage Junaidi to take the road more than 5 km.

Another modification of the flow of new trends that will busy, ie, hot rod on skutik. "Contribution" is from a collaboration with Shaflingga Budi "Big" Rahmanto from Big Modification, East Jakarta. They conjure up a 2005 Yamaha Mio classic street rod style.

Consideration Agha-Shaflingga-friendly greeting as timeless and classic style ever be preferred. For example, he continued, could lyrics Fino body that proved many fans. This is different with custom body that would favor a moment.

The specialty of this modification is telling Fino combines a slim body with great legs. It's like the front is fitted with 4-inch wide tires, and rear 8 inches in diameter and 14 inches. "We want a slim body sustained significant leg. Therefore, deliberately ordered alloy wide soles," says this economics graduate.

Apply because the flow of hot rod (American style), design alloy wheels with a penchant for tailored adherents of this school in his native country, by wearing tight radius of up to 120 bar spending. Because there is a replacement rim, could not help but be a special drum made of aluminum material which dibubut logs.

To give the impression that the foot is used really big, so contrived skubek flat. That means the suspension system changed a bit. "Purposely constrained rigid front and back so that there is a distance enggak play. The goal, avoiding stuck between the body and wheels," said Agha.

Custom exhaust design reinforced pointed style. According to Agha, the model is copied from the Harley-Davidson magazine. Size adjusted body stay Mio. Budi enggak Agha and only focus on large section, but also improve bagaian detail.

For daily use, Yamaha Mio Sporty appearance of this Purwokerto less unsightly. Modifications to impress without the concept and look busy. Siswo Winoto, builder of Win's Paddock, Purwokerto, Central Java, such as running out of ideas when working on the production 2008 Yamaha skutik this.

The reason, sejal Mio early experiments on this, he just wants to escape the flow of low-rider and hotrod. In fact, "I try to combine the concept of low-rider and hotrod. It makes matic fighter," said Win, Winoto Siswo close calls.

Win a fighter matic work is hardly a breakthrough because it is similar to streetfighter. Moreover, here will find trimming chassis, and lived 30 percent maintained the original framework, including komstir to down tube.

For the trellis model framework of the Ducati Monster is transformed into this skutik, Win spent a total of 9 meters pipes with different diameters. For the main frame, he wore a size 3.4-inch pipe 4.5 meters long, while for the buffer, it uses 1.5-inch pipe.

"Out pipe about 9 meters. All contrived mutual support. Sokbreker Includes rear support, it must be careful," said Win. He continued, if one construction, the burden of retaining the pipe can be bent sokbreker.

For finishing, so-so this process given thumbs-up. Detail and color composition formulated neat. However, it would be interesting if the back axle is not excessive, and the use of handlebars are not too wide.

However, there was an interesting time this bike out of smoke. Exhaust tip with a small hole-like automatic weapons-will spin.